Gemco Programable Rotary and Linear Devices
Gemco Resolver and Linear Programmable Limit Switches
Gemco 2500 Series PLC
The Gemco 2500 Series PLS is a high-speed resolver based Programmable Limit Switch that monitors rotary machine position and provides discrete limit switch outputs. These outputs are updated at a much faster rate than can be accomplished using any conventional PLC. The 2500 Series uses a unique easy to understand programming sequence. The traditional number buttons have been replaced with a rotary knob and the main controller has a 2 x 24 vacuum fluorescent display along with four push-button keys for programming
2120 Interface Module (Typical)
The 2120 is a modular system is designed to use our Resolvers or Digital Linear Transducers. There are three optional slots in the controller that can accommodate Analog, Digital or Relay Outputs (Upper & Lower End Limits). These optional features can be used to interface positional or velocity data back to a PLC or host controller.
1989 Series Multi-Turn System
The 1989 Series Quik-Set III Multi-turn PLS is a fully integrated microcomputer-based Programmable Limit Switch with a convenient keypad for programming each independent output circuit to open or close at the desired settings. The system allows precise position control of either rotary or linear motion through the keypad or by a remote programmable controller, computer or via any remote serial data link using RS-232 or RS-422. The 1989 Series comes standard with 16 circuits and is expandable to 48 circuits.
